Blog

November 20, 2026

Which power ascender for wind turbines? ACE-24 vs ACE-22 vs ACE-51

Climbing a wind turbine tower by ladder takes time and energy that technicians would rather spend on the job at the top. A battery power ascender lifts the technician, tools or a rescue load up a rope in minutes instead. ASAT makes three ascenders that we supply for this work: the ACE-24, the ACE-22 and the ACE-51. Here is how they compare and which one suits which turbine job.

The short answer

  • ACE-24: our pick for most wind farms. It has the highest load, the longest climb per battery and the best weather sealing (IP56), so it handles a technician with tools, rescue work and exposed sites.
  • ACE-22: for blade work. At 10.5 kg it is much lighter to carry up the tower, and it is a good fit for blade inspection and repair.
  • ACE-51: for light hauling and backup. It is the lightest of the three, but it is slower and rated for lower loads, so it is best for short distances.

ACE-24 vs ACE-22 vs ACE-51 at a glance

ACE-24 (recommended)ACE-22ACE-51
Rated working load180 kg140 kg100 kg
Working load limit260 kg180 kg150 kg
Speed up / down0–30 / 0–40 m/min0–30 / 0–40 m/min0–15 / 0–20 m/min
Continuous climb per battery300 m at 150 kg160 m at 120 kg200 m at 100 kg
Up & down per battery700 m400 m400 m+
Weight18 kg10.5 kg3.6 kg*
Ingress protectionIP56IP54–
Operating temperature−30 to +60 °C−20 to +60 °C−10 to +50 °C
Best forTechnicians + tools, rescue, exposed sitesBlade inspection & repair, carried up the towerLight hauling / backup, short distances

* ACE-51 weight without battery. Figures from ASAT specifications.

ASAT ACE-24: the all-round wind turbine ascender

The ACE-24 is the one we recommend for most turbine maintenance teams. Its 180 kg rated load (260 kg working load limit) leaves room for a technician plus a tool bag, and it is strong enough for rescue. It climbs up to 30 m/min and covers 300 m of continuous climb at 150 kg on one battery, or 700 m of combined up and down travel. That is enough for several tower climbs in a shift. IP56 sealing and an operating range of −30 to +60 °C make it suitable for exposed coastal and hilltop sites. The trade-off is weight: at 18 kg it is the heaviest of the three.

ASAT ACE-22: lighter, for blade inspection and repair

The ACE-22 keeps the same top speed as the ACE-24 (0–30 m/min up, 0–40 m/min down) at 10.5 kg, which makes it far easier to carry up the tower and move around the nacelle. It is rated for 140 kg (180 kg working load limit) and climbs 160 m continuously at 120 kg, or 400 m up and down per battery. It is IP54 rated and works from −20 to +60 °C. Choose it when the team is doing blade inspection and repair and portability matters more than maximum load.

ASAT ACE-51: ultra-light for hauling and backup

The ACE-51 weighs just 3.6 kg without its battery. It is rated for 100 kg (150 kg working load limit) and moves at up to 15 m/min up and 20 m/min down, with 200 m of continuous climb at 100 kg and 400 m+ of up and down travel per battery. It has no listed ingress rating and works from −10 to +50 °C. That makes it best as a light hauling unit or backup over short distances, rather than the main ascender for a tall tower.

How to choose

  • Climbing tall towers several times a day, with tools, or in harsh weather? Choose the ACE-24.
  • Mostly blade work, where the unit has to be carried up and moved around? Choose the ACE-22.
  • Lifting light loads or need a compact backup? Choose the ACE-51.
  • Not sure? Tell us your hub height, the loads you lift and how many climbs you do per shift, and we will confirm the right model.

Safety first

A power ascender is not a fall arrest system on its own. Always use a separate safety rope with a fall arrester, such as a guided type fall arrester, together with a full body harness, karabiners, a helmet and safety shoes. Power ascenders are for trained rope-access technicians only. You can build a complete wind turbine maintenance kit for your crew in our Safety Kit Builder on the homepage.

Get a quote

Planetsafe supplies the full ASAT power ascender range from Mumbai. Our team will confirm the right model for your turbine and hub height. Open any of the product pages (ACE-24, ACE-22, ACE-51) and click Enquire Now, or contact us on WhatsApp.

Buying Guide, Fall Protection
About Rakesh Temkar

Leave a Reply

Your email address will not be published. Required fields are marked *

Chat with us